您现在的位置: 首页 > 产品中心 > 插座系列 > DC电源插座 > DC插座插件 >
KSD-DCJ-FS-5520

KSD-DCJ-FS-5520

  • 产品特性
  • 应用范围

图纸下载 样品申请
产品名称：防水DC插座
产品规格：
笔记：
1.额定电流：最大24V和5A。
2.接触电阻：最大50mOhms（初始）
3.绝缘电阻：最小100M欧姆/500V直流
4.绝缘耐压：500V AC/1分钟
5.对接力：最大35N，退出力：最小3N。
6.耐久性：5000次循环
7.0工作温度：-25℃至+85℃
产品符合：ROHS
品牌：科斯达开关 KSDKG
产地：中国东莞


DC插座5521和5525常用于电子设备的电源连接，主要区别在于它们的尺寸和适用的电缆。具体来说：

5521插座：内径通常为2.1毫米，外径为5.5毫米，适用于较小的电流和功率设备。
5525插座：内径为2.5毫米，外径同样为5.5毫米，适合较大功率的设备。
使用时，要确保插头与插座的匹配，以避免连接不良或损坏设备。通常，这些插座广泛应用于消费电子产品、嵌入式设备、LED照明等场合。


DC插座防水可以通过以下几种方式实现：
1.选择防水插座：市场上有专门设计的防水DC插座，通常标有IP等级，比如IP65或更高，可以有效防止水和灰尘的侵入。

2.使用防水罩：如果插座没有防水设计，可以使用防水罩或密封盖，确保插座在使用时不容易进水。

3.密封材料：在安装插座时，可以使用硅胶或防水胶带对接缝进行密封，确保没有水进入插座内部。

4.合理布线：在布线时，尽量避免将插座置于易受水浸的地方，必要时采取其他防护措施，例如设置在高于地面的地方。

5.定期检查：定期检查插座的状态，确保防水措施有效，及时处理可能的老化或损坏问题。

通过这些措施，可以大大提高DC插座的防水性，保护电路和设备的安全。


防水DC插座的特点包括：
1.防水性能：设计符合IP等级标准，能够有效防止水和尘埃的侵入，适用于户外或潮湿环境。

2.耐候性：采用耐高低温、抗紫外线的材料，能够在多种气候条件下保持性能稳定。

3.安全性：一般都有短路保护和过流保护功能，能有效避免电气故障造成的安全隐患。

4.易于连接：通常采用螺纹或插拔式连接，便于快速连接和断开，使用方便。

5.多种规格：提供不同的电压和电流规格，以适应不同的应用需求。

6.稳定性：接触良好，保证电流传输稳定，降低电阻损耗。

7.安装简便：大多数防水DC插座设计为易于安装，可适用于不同的设备和场景。

8.适用范围广：广泛应用于户外设备、汽车、摩托车、船只等多种场合。

这些特点使得防水DC插座非常适合在各种苛刻环境下使用，确保电气连接的安全与可靠。


Product Name: Waterproof DC Socket
Product specifications:
Notes:
1. Rated current: maximum 24V and 5A.
2. Contact resistance: maximum 50mOhms (initial)
3. Insulation resistance: minimum 100M ohms/500V DC
4. Insulation withstand voltage: 500V AC/1 minute
5. Relay: maximum 35N, withdrawal force: minimum 3N.
6. Durability: 5000 cycles
7.0 Operating temperature: -25 ℃ to+85 ℃
Product compliance: ROHS
Brand: Coaster Switch KSDKG
Origin: Dongguan, China


DC sockets 5521 and 5525 are commonly used for power connections in electronic devices, with the main difference being their size and applicable cables. Specifically:

5521 socket: The inner diameter is usually 2.1 millimeters and the outer diameter is 5.5 millimeters, suitable for smaller current and power devices.
5525 socket: with an inner diameter of 2.5 millimeters and an outer diameter of 5.5 millimeters, suitable for high-power devices.
When using, make sure the plug matches the socket to avoid poor connection or damage to the equipment. Usually, these sockets are widely used in consumer electronics, embedded devices, LED lighting, and other occasions.


DC socket waterproofing can be achieved through the following methods:
1. Choose waterproof sockets: There are specially designed waterproof DC sockets on the market, usually labeled with IP rating, such as IP65 or higher, which can effectively prevent water and dust from entering.

2. Use waterproof cover: If the socket does not have a waterproof design, a waterproof cover or sealing cover can be used to ensure that the socket is not easily flooded during use.

3. Sealing material: When installing the socket, silicone or waterproof tape can be used to seal the joints to ensure that no water enters the inside of the socket.

4. Reasonable wiring: When wiring, try to avoid placing sockets in areas that are susceptible to water immersion. If necessary, take other protective measures, such as placing them above ground level.

5. Regular inspection: Regularly check the status of the socket to ensure effective waterproof measures and promptly address any possible aging or damage issues.

Through these measures, the waterproof performance of DC sockets can be greatly improved, protecting the safety of circuits and equipment.


The characteristics of waterproof DC sockets include:
1. Waterproof performance: Designed to meet IP rating standards, it can effectively prevent the intrusion of water and dust, and is suitable for outdoor or humid environments.

2. Weather resistance: Made of materials that are resistant to high and low temperatures and UV rays, they can maintain stable performance under various climatic conditions.

3. Safety: Generally, there are short-circuit protection and overcurrent protection functions, which can effectively avoid safety hazards caused by electrical faults.

4. Easy to connect: Threaded or plug-in connections are usually used for quick connection and disconnection, making it easy to use.

5. Multiple specifications: Provide different voltage and current specifications to meet different application needs.

6. Stability: Good contact ensures stable current transmission and reduces resistance losses.

7. Easy installation: Most waterproof DC sockets are designed to be easy to install and suitable for different devices and scenarios.

8. Wide applicability: Widely used in various occasions such as outdoor equipment, automobiles, motorcycles, boats, etc.

These features make waterproof DC sockets very suitable for use in various harsh environments, ensuring the safety and reliability of electrical connections.
首页 | 关于我们 | 产品中心 | 新闻中心 | 投资者关系

0769-83662567

地址：中国广东省东莞市黄江合路第一工业区

0.107391s