KSD-TC-017W series

产品特性应用范围

样品申请

浏览 72 次

产品特性

应用范围

带灯轻触开关防水IP67规范
开关规格
开关规格
杆-位置：瞬时动作，SPST
最大值：12V DC，50mA
触点额定值最小值：1VDC，50μA 500mQMAX.5VDC；10mA，
接触电阻：电压降法
绝缘电阻：100 MQ，最小100 V DC，持续1分钟
绝缘强度：不允许发生故障；250 V交流电持续1分钟
操作力：200土80gf
使用寿命：100000次循环
工作温度范围：-40°C~85°C
总行程：0.25土0.1毫米
密封：IP67

防水轻触带灯开关技术介绍

防水带灯轻触开关

防水带灯轻触开关是一种专门设计用于控制防水LED带灯的轻触开关。它具有防水等级，可防止水和灰尘进入开关，使其适用于潮湿或多水环境。

结构和工作原理

防水带灯轻触开关的结构类似于标准轻触开关，但具有额外的防水功能：

**密封外壳：**开关本体由防水材料制成，并密封以防止水渗入。
**密封触点：**触点被密封在防水膜或涂层中，以防止短路或腐蚀。
**防水垫片：**在开关周围放置防水垫片，以防止水从开关和安装表面之间的缝隙进入。
开关的工作原理与标准轻触开关相同。当开关被按下时，弹簧或橡胶穹顶会变形并使触点接触，从而闭合电路并为LED带灯供电。当开关被松开时，弹簧或橡胶穹顶会将触点弹回原位，从而断开电路并关闭LED带灯。

优点

防水带灯轻触开关具有以下优点：

**防水：**提供可靠的防水保护，适合潮湿或多水环境。
**易于使用：**只需轻按即可激活，无需施加很大的力。
**紧凑尺寸：**相对于其他类型的防水开关，尺寸相对紧凑。
**美观：**通常设计得美观，与现代室内装饰相匹配。
应用

防水带灯轻触开关主要用于以下应用：

厨房和浴室的防水LED灯带
户外露台、阳台和花园的防水LED灯带
船舶和海洋设备的防水LED灯带
医疗保健和食品加工设施的防水LED灯带
选择

选择防水带灯轻触开关时，应考虑以下因素：

所需的开关类型（常开或常闭）
电流和电压额定值
防水等级（IP等级）
环境条件

SWITCH SPECIFICATIONS
POLE - POSITION：Momentary action，SPST
MAX.: 12V DC , 50 mA
CONTACT RATING MIN.:1VDC,50μA 500mQMAX.5VDC;10mA,
CONTACT RESISTANCE：by Method of Voltage DROP
INSULATION RESISTANCE：100 MQ MIN. 100 V DC for 1 minute
DIELECTRIC STRENGTH .：Breakdown is not Allowable ;250 V AC for 1 Minute
OPERATING FORCE .：200土80gf
OPERATING LIFE：100,000 cycles
OPERATING TEMPERATURE RANGE：-40°C ~ 85°C
TOTAL TRAVEL：0.25土0.1 mm
SEALING：IP67

Introduction to Waterproof Light Touch LED Switch Technology

Waterproof strip light touch switch

The waterproof strip light touch switch is a specially designed touch switch for controlling waterproof LED strip lights. It has a waterproof rating that prevents water and dust from entering the switch, making it suitable for humid or high water environments.

Structure and working principle

The structure of the waterproof strip light touch switch is similar to a standard touch switch, but it has additional waterproof functions:

**Sealed casing: The switch body is made of waterproof material and sealed to prevent water from seeping in.
**Sealed contacts: * * The contacts are sealed in a waterproof film or coating to prevent short circuits or corrosion.
**Waterproof gasket: * * Place waterproof gaskets around the switch to prevent water from entering through the gap between the switch and the installation surface.
The working principle of the switch is the same as that of a standard tactile switch. When the switch is pressed, the spring or rubber dome will deform and make contact with the contacts, thereby closing the circuit and supplying power to the LED strip light. When the switch is released, the spring or rubber dome will bounce the contacts back to their original position, thereby disconnecting the circuit and turning off the LED strip light.

advantage

The waterproof strip light touch switch has the following advantages:

**Waterproof: * * Provides reliable waterproof protection, suitable for humid or high water environments.
**Easy to use: * * Just press lightly to activate, no need to apply a lot of force.
**Compact size: * * Compared to other types of waterproof switches, the size is relatively compact.
**Aesthetic: * * Usually designed to be aesthetically pleasing and match modern interior decoration.
application

The waterproof strip light touch switch is mainly used for the following applications:

Waterproof LED light strips for kitchen and bathroom
Waterproof LED light strips for outdoor terraces, balconies, and gardens
Waterproof LED light strips for ships and marine equipment
Waterproof LED light strips for healthcare and food processing facilities
choice

When choosing a waterproof strip light touch switch, the following factors should be considered:

Required switch type (normally open or normally closed)
Rated values of current and voltage
Waterproof rating (IP rating)
environment condition

上一个：KSD-TC-018 series
下一个：KSD-TC-014-N11BSWT series