您现在的位置: 首页 > 产品中心 > 开关系列 > 带灯开关 >
KSD-L series

KSD-L series

  • 产品特性
  • 应用范围

图纸下载 样品申请
带灯LED照明轻触开关规范
开关规格
ON-<ON>适用于瞬时型，极性位置：ON-ON适用于自锁型SPDT、DPDT
触点额定值12V 50mA直流
最大50 mΩ（银色触点）；
接触电阻最大100mΩ（镀金触点），
1.5伏直流电；100mA，采用电压降法
绝缘电阻最小100平方米，500伏直流电介电强度不允许发生故障；1000V交流电持续1分钟
操作力
200士100gf（SPDT）
300土150 gf（DPDT）
200000个cydles（银色触点）
使用寿命
200000次循环（镀金触点）
操作
温度范围-40°C~85°C
总行程2.2土0.2毫米


LED轻触带灯开关技术介绍

带灯LED轻触开关

带灯LED轻触开关是一种轻触开关，它有一个内置的LED灯，当开关处于打开或关闭状态时，该LED灯会亮起。这使得即使在黑暗中也能轻松找到开关。

结构和工作原理

带灯LED轻触开关的结构与标准轻触开关类似，但具有以下附加功能：

**LED灯：**开关内部有一个小型LED灯，通常为红色、绿色或蓝色。
**电阻器：**一个电阻器与LED串联，以限制通过LED的电流。
**电路：**当开关处于打开状态时，电流通过LED和电阻器，导致LED亮起。当开关处于关闭状态时，电路断开，LED熄灭。
优点

带灯LED轻触开关具有以下优点：

**易于找到：**即使在黑暗中也能轻松找到，因为LED灯会在开关处于打开或关闭状态时亮起。
**美观：**LED灯可以发出各种颜色的光，这可以增强室内装饰。
**节能：**LED灯非常节能，消耗的电量很小。
**长寿命：**LED灯的使用寿命极长，通常可以持续数万小时。
应用

带灯LED轻触开关主要用于以下应用：

住宅和商业建筑的照明控制
台灯、落地灯和其他灯具的开关
电器和电子设备的开关
汽车和船舶的控制面板
选择

选择带灯LED轻触开关时，应考虑以下因素：

所需的开关类型（常开或常闭）
电流和电压额定值
LED灯的颜色
外壳材料和饰面
成本
安装

带灯LED轻触开关的安装与标准轻触开关类似。应由合格电工按照制造商的说明进行安装。

Specification for Light Touch Switches with LED Lighting
Switch specifications
ON -<ON>is suitable for instantaneous type, polarity position: ON-ON is suitable for self-locking SPDT, DPDT
Contact rated 12V 50mA DC
Maximum 50 m Ω (silver contact);
The maximum contact resistance is 100m Ω (gold-plated contacts),
1.5 volts direct current; 100mA, using voltage drop method
The minimum insulation resistance is 100 square meters, and the dielectric strength of 500 volts DC does not allow faults to occur; 1000V AC for 1 minute
Operating power
200 ± 100gf (SPDT)
300 ± 150 gf (DPDT)
200000 cylinders (silver contacts)
service life
200000 cycles (gold-plated contacts)
operation
Temperature range -40 ° C~85 ° C
Total travel 2.2 ± 0.2 millimeters

Introduction to LED light touch strip switch technology

Light touch switch with LED light

A light LED touch switch is a type of touch switch that has a built-in LED light that lights up when the switch is in the on or off state. This makes it easy to find the switch even in the dark.

Structure and working principle

The structure of the LED touch switch with lights is similar to that of a standard touch switch, but it has the following additional functions:

**LED light: The switch has a small LED light inside, usually red, green, or blue.
**Resistors: * * A resistor is connected in series with the LED to limit the current passing through the LED.
**Circuit: When the switch is in the open state, current flows through the LED and resistor, causing the LED to light up. When the switch is in the off state, the circuit is disconnected and the LED is turned off.
advantage

LED touch switches with lights have the following advantages:

**Easy to find: * * Even in the dark, it can be easily found because the LED light will light up when the switch is in the on or off state.
**Aesthetic: * * LED lights can emit light of various colors, which can enhance indoor decoration.
**Energy saving: * * LED lights are very energy-efficient and consume very little electricity.
**Long lifespan: * * LED lights have an extremely long service life, typically lasting tens of thousands of hours.
application

LED touch switches with lights are mainly used for the following applications:

Lighting control for residential and commercial buildings
Switches for desk lamps, floor lamps, and other lighting fixtures
Switches for electrical and electronic devices
Control panels for automobiles and ships
choice

When choosing a light LED touch switch, the following factors should be considered:

Required switch type (normally open or normally closed)
Rated values of current and voltage
Color of LED lights
Shell material and finish
cost
install

The installation of LED touch switches with lights is similar to that of standard touch switches. Installation should be carried out by qualified electricians according to the manufacturer's instructions.

首页 | 关于我们 | 产品中心 | 新闻中心 | 投资者关系

0769-83662567

地址：中国广东省东莞市黄江合路第一工业区

0.098884s