您现在的位置: 首页 > 产品中心 > 开关系列 > 带灯开关 >
KSD-TC-002-S5 TYPE

KSD-TC-002-S5 TYPE

  • 产品特性
  • 应用范围

图纸下载 样品申请
带灯LED照明轻触开关规范
开关规格
灯杆-位置：1P1T，带LED开关
触点额定值：12VDC，50mA
100 mΩ最大1.5 V DC；100mA，
接触电阻：电压降法
绝缘电阻：最小100mΩ，500v直流
迪尔。电强度：不允许击穿；500 V交流电持续1分钟
操作力：180土50gf
使用寿命：50000次循环
工作温度范围：-40°C~85°C
总行程：0.2土0.1毫米
LED轻触带灯开关技术介绍
带灯LED轻触开关
带灯LED轻触开关是一种轻触开关，它有一个内置的LED灯，当开关处于打开或关闭状态时，该LED灯会亮起。这使得即使在黑暗中也能轻松找到开关。
结构和工作原理
带灯LED轻触开关的结构与标准轻触开关类似，但具有以下附加功能：
**LED灯：**开关内部有一个小型LED灯，通常为红色、绿色或蓝色。
**电阻器：**一个电阻器与LED串联，以限制通过LED的电流。
**电路：**当开关处于打开状态时，电流通过LED和电阻器，导致LED亮起。当开关处于关闭状态时，电路断开，LED熄灭。
优点
带灯LED轻触开关具有以下优点：
**易于找到：**即使在黑暗中也能轻松找到，因为LED灯会在开关处于打开或关闭状态时亮起。
**美观：**LED灯可以发出各种颜色的光，这可以增强室内装饰。
**节能：**LED灯非常节能，消耗的电量很小。
**长寿命：**LED灯的使用寿命极长，通常可以持续数万小时。
应用
带灯LED轻触开关主要用于以下应用：
住宅和商业建筑的照明控制
台灯、落地灯和其他灯具的开关
电器和电子设备的开关
汽车和船舶的控制面板
选择
选择带灯LED轻触开关时，应考虑以下因素：
所需的开关类型（常开或常闭）
电流和电压额定值
LED灯的颜色
外壳材料和饰面
成本
安装
带灯LED轻触开关的安装与标准轻触开关类似。应由合格电工按照制造商的说明进行安装。
Specification for Light Touch Switches with LED Lighting
Switch specifications
Lamp Pole - Position: 1P1T, with LED Switch
Contact rating: 12VDC, 50mA
100 m Ω maximum 1.5 V DC; 100mA，
Contact resistance: voltage drop method
Insulation resistance: minimum 100m Ω, 500V DC
Dill. Electrical strength: No breakdown allowed; 500 V AC for 1 minute
Operating force: 180 ± 50gf
Service life: 50000 cycles
Working temperature range: -40 ° C~85 ° C
Total travel distance: 0.2 ± 0.1 millimeters
Introduction to LED light touch strip switch technology
Light touch switch with LED light
A light LED touch switch is a type of touch switch that has a built-in LED light that lights up when the switch is in the on or off state. This makes it easy to find the switch even in the dark.
Structure and working principle
The structure of the LED touch switch with lights is similar to that of a standard touch switch, but it has the following additional functions:
**LED light: The switch has a small LED light inside, usually red, green, or blue.
**Resistors: * * A resistor is connected in series with the LED to limit the current passing through the LED.
**Circuit: When the switch is in the open state, current flows through the LED and resistor, causing the LED to light up. When the switch is in the off state, the circuit is disconnected and the LED is turned off.
advantage
LED touch switches with lights have the following advantages:
**Easy to find: * * Even in the dark, it can be easily found because the LED light will light up when the switch is in the on or off state.
**Aesthetic: * * LED lights can emit light of various colors, which can enhance indoor decoration.
**Energy saving: * * LED lights are very energy-efficient and consume very little electricity.
**Long lifespan: * * LED lights have an extremely long service life, typically lasting tens of thousands of hours.
application
LED touch switches with lights are mainly used for the following applications:
Lighting control for residential and commercial buildings
Switches for desk lamps, floor lamps, and other lighting fixtures
Switches for electrical and electronic devices
Control panels for automobiles and ships
choice
When choosing a light LED touch switch, the following factors should be considered:
Required switch type (normally open or normally closed)
Rated values of current and voltage
Color of LED lights
Shell material and finish
cost
install
The installation of LED touch switches with lights is similar to that of standard touch switches. Installation should be carried out by qualified electricians according to the manufacturer's instructions.

首页 | 关于我们 | 产品中心 | 新闻中心 | 投资者关系

0769-83662567

地址：中国广东省东莞市黄江合路第一工业区

0.096286s