您现在的位置: 首页 > 产品中心 > 开关系列 > 带灯开关 >
KSD-TC-003 A TYPE

KSD-TC-003 A TYPE

  • 产品特性
  • 应用范围

图纸下载 样品申请
照明带灯轻触开关LED规范
开关规格
杆-位置：1P1T，直角推入式，带或不带LED
触点额定值：12VDC，50mA 100 mΩ最大1.5V DC；100mA
接触电阻：电压降法
绝缘电阻：最小100mq.500v直流
模具电强度：不允许击穿；500 V交流电持续1分钟
操作力：160士50gf
使用寿命：500000次循环
工作温度范围：-40°C~85°C
总行程：0.2±0.1毫米

侧按LED带灯轻触开关技术介绍

侧按轻触开关带灯
侧按轻触开关带灯是一种轻触开关，当从侧面按压时会触发，并且具有一个内置的LED灯，当开关处于打开或关闭状态时，该LED灯会亮起。

结构和工作原理
侧按轻触开关带灯的结构与标准侧按轻触开关类似，但具有以下附加功能：

**LED灯：**开关内部有一个小型LED灯，通常为红色、绿色或蓝色。
**电阻器：**一个电阻器与LED串联，以限制通过LED的电流。
**电路：**当开关从侧面按压时，内部触点闭合，电流通过LED和电阻器，导致LED亮起。当开关释放时，触点断开，LED熄灭。
优点
侧按轻触开关带灯具有以下优点：

**易于使用：**可以从侧面轻松按压，即使在狭小空间中。
**易于找到：**即使在黑暗中也能轻松找到，因为LED灯会在开关处于打开或关闭状态时亮起。
**美观：**LED灯可以发出各种颜色的光，这可以增强室内装饰。
**节能：**LED灯非常节能，消耗的电量很小。
**长寿命：**LED灯的使用寿命极长，通常可以持续数万小时。
应用

侧按轻触开关带灯主要用于以下应用：

住宅和商业建筑的照明控制
台灯、落地灯和其他灯具的开关
电器和电子设备的开关
汽车和船舶的控制面板
选择

选择侧按轻触开关带灯时，应考虑以下因素：

所需的开关类型（常开或常闭）
电流和电压额定值
LED灯的颜色
外壳材料和饰面
安装
侧按轻触开关带灯的安装与标准侧按轻触开关类似。应由合格电工按照制造商的说明进行安装。


Lighting strip light touch switch LED specification
Switch specifications
Rod - Position: 1P1T, right angle push in type, with or without LED
Contact rating: 12VDC, 50mA, 100m Ω, maximum 1.5V DC; 100mA
Contact resistance: voltage drop method
Insulation resistance: minimum 100mq.500v DC
Mold electrical strength: No breakdown allowed; 500 V AC for 1 minute
Operating force: 160 ± 50gf
Service life: 500000 cycles
Working temperature range: -40 ° C~85 ° C
Total travel: 0.2 ± 0.1 millimeters

Introduction to Side Press LED Light Touch Switch Technology

Side press touch switch with light
Side press tactile switch with light is a type of tactile switch that triggers when pressed from the side and has a built-in LED light that lights up when the switch is in the on or off state.

Structure and working principle
The structure of the side press touch switch with light is similar to that of a standard side press touch switch, but it has the following additional functions:

**LED light: The switch has a small LED light inside, usually red, green, or blue.
**Resistors: * * A resistor is connected in series with the LED to limit the current passing through the LED.
**Circuit: When the switch is pressed from the side, the internal contacts close and current flows through the LED and resistor, causing the LED to light up. When the switch is released, the contacts open and the LED goes out.
advantage
The side press touch switch with light has the following advantages:

**Easy to use: * * Can be easily pressed from the side, even in small spaces.
**Easy to find: * * Even in the dark, it can be easily found because the LED light will light up when the switch is in the on or off state.
**Aesthetic: * * LED lights can emit light of various colors, which can enhance indoor decoration.
**Energy saving: * * LED lights are very energy-efficient and consume very little electricity.
**Long lifespan: * * LED lights have an extremely long service life, typically lasting tens of thousands of hours.
application

The side press touch switch with light is mainly used for the following applications:

Lighting control for residential and commercial buildings
Switches for desk lamps, floor lamps, and other lighting fixtures
Switches for electrical and electronic devices
Control panels for automobiles and ships
choice

When selecting a side press touch switch with a light, the following factors should be considered:

Required switch type (normally open or normally closed)
Rated values of current and voltage
Color of LED lights
Shell material and finish
install
The installation of the side press touch switch with light is similar to that of a standard side press touch switch. Installation should be carried out by qualified electricians according to the manufacturer's instructions.
首页 | 关于我们 | 产品中心 | 新闻中心 | 投资者关系

0769-83662567

地址：中国广东省东莞市黄江合路第一工业区

0.095432s