产品图纸（PDF）：KSD-KT series 下载
KSD-KT series 技术特性KSD-KT 侧贴轻触开关SMT 顶部和侧面操作密封SMD轻触开关端子：SMT端子电气触点额定值：最大交流或直流32 V时最大1.0 VA。电气和机械寿命：100000通断满载循环。介电强度：海平面最低250 Vrms。接触电阻：典型值低于50 mΩ。初始@2-4V DC、100mA。绝缘电阻：109Ω最小值。环境的工作温度：Ag版本：-40˚C至90˚CAu版本：-40˚C至125˚C流程可焊性：根据MIL-STD-202F方法208D或EIA RS-186E方法9（1小时蒸汽老化）。防护等级：IP57；防止有害粉尘沉积物，全尺寸电压保护。包装根据EIA 481-2，开关采用防静电胶带和卷轴供应。胶带覆盖条具有导电性，适用于静电敏感附近组件。注：以上列出的规格适用于具有标准选项的开关。有关特定和自定义开关的信息，请咨询客户服务中心科斯达开关厂的KSD-KT series 系列全 SMT 顶部和侧面起动操作卧贴轻触开关具有高剪切力和长支架, 使其具有很长的使用寿命。再加上KSD-KT 的 G 或 J 端子, 令其成为计算机、仪器仪表和电源应用的理想选择。KSD-KT series Technical characteristicsKSD-KT side mounted touch switch SMT top and side operation sealed SMD touch switchTerminal: SMT terminalelectricalContact rating: 1.0 VA maximum at 32 V AC or DC.Electrical and mechanical lifespan: 100000 on/offFull load cycle.Dielectric strength: The lowest at sea level is 250 Vrms.Contact resistance: Typical value below 50 m Ω. Initial@2-4V DC, 100mA.Insulation resistance: 109Minimum value of Ω.The environmentWorking temperature: Ag version: -40 ° C to 90 ° CAu version: -40 ° C to 125 ° Ctechnological processSolderability: According to MIL-STD-202F method 208D or EIA RS-186EMethod 9 (1-hour steam aging).Protection level: IP57; Prevent harmful dustSediments, full-size voltage protection.packingAccording to EIA 481-2, switches are supplied with anti-static tape and reels. adhesive tapeThe covering strip has conductivity and is suitable for areas sensitive to static electricityComponents.Note: The specifications listed above apply to switches with standard options.For information on specific and custom switches, please consult the customer service centerThe KSD-KT series full SMT top and side start operation flat touch switches from Costa Switch Factory have high shear force and long brackets, making them have a long service life. In addition, the G or J terminals of KSD-KT make it an ideal choice for computer, instrumentation, and power applications.
