您现在的位置: 首页 > 产品中心 > 开关系列 > 轻触开关 > 防水轻触开关 >
KSD-KSC5  series

KSD-KSC5 series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-KSC5  series  技术特性
SMD贴片跷板选项的轻触开关
电气
最大功率:1瓦0.2瓦
最大电压:32伏直流32伏直流
最小电压:20 mV 20 mV
最大电流:50 mA 10 mA
最小电流:1mA*0.1mA
介电强度(50 Hz,1分钟):≥250 Vrms
接触电阻:≤100mΩ
绝缘电阻(100v):≥10MΩ
弹跳时间:≤1ms
*根据要求,可提供10µA-1 VDC版本的超低电流KSD-KSC2和KSD-KSC4
包装磁带和卷轴(数量信息见系列)
注:以上列出的规格适用于具有标准选项的开关。

规范
功能:瞬时动作
接触布置:1接触=SPST,N.O。
端子:J型弯曲和鸥翼式,适用于SMT
密封:IP67,KSC5除外(IP50)
责任限制此数据表没有提供足够的信息需要一定质量或安全水平的应用程序例如汽车、医疗系统或安全设备。请联系客户服务部了

规格包。
环保银金
工作温度:-40℃至85℃-40℃至125℃
储存温度:-55˚C至85˚C-55˚C至125˚C
流程
焊接:根据应用的不同,该组件是适用于以下方法:-端子在镍屏障上镀银或镀金使用微活化焊剂是合适的。–立式双波焊机上的焊接:焊接时间≤5秒。–按照典型的洗涤流程进行清洁。-红外回流焊符合IEC 61760-1标准。

科斯达开关厂的KSD-KSC5  series  系列防水SMT贴片轻触开关, 带跷板选项, 其设计比许多其他开关更小巧, 更灵活。开关具有 5.6mm 高的塑胶触头, 给用户带来良好的适应性触感, 并且符合 IP50 标准。KSD-KSC5 开关主要用于工业、消费类电子和汽车应用。

KSD-KSC5  series   Technical characteristics
Touch switch for SMD surface mount seesaw options
electrical
Maximum power: 1 watt 0.2 watts
Maximum voltage: 32 volts DC 32 volts DC
Minimum voltage: 20 mV, 20 mV
Maximum current: 50 mA, 10 mA
Minimum current: 1mA * 0.1mA
Dielectric strength (50 Hz, 1 minute): ≥ 250 Vrms
Contact resistance: ≤ 100m Ω
Insulation resistance (100v): ≥ 10M Ω
Bounce time: ≤ 1ms
*According to the requirements, ultra-low current KSD-KSC2 and KSD-KSC4 versions of 10 µ A-1 VDC can be provided
Packaging tapes and reels (quantity information can be found in the series)
Note: The specifications listed above apply to switches with standard options.
standard
Function: Instantaneous action
Contact arrangement: 1 contact=SPST, N.O.
Terminal: J-bend and gull wing type, suitable for SMT
Sealing: IP67, except KSC5 (IP50)
Liability limitation: This data sheet does not provide sufficient information for applications that require a certain level of quality or safety, such as automobiles, medical systems, or safety equipment. Please contact the customer service department
Specification package.
Environmental Protection Silver Gold
Working temperature: -40 ℃ to 85 ℃ -40 ℃ to 125 ℃
Storage temperature: -55 ° C to 85 ° C -55 ° C to 125 ° C
technological process
Welding: Depending on the application, this component is suitable for the following methods: - Silver or gold plating of terminals on nickel barriers using micro activated flux is appropriate Welding on vertical double wave welding machine: welding time ≤ 5 seconds Clean according to the typical washing process- Infrared reflow soldering complies with IEC 61760-1 standard.
The KSD-KSC5 series waterproof SMT patch touch switch from Costa Switch Factory comes with a seesaw option, and its design is smaller and more flexible than many other switches. The switch has plastic contacts with a height of 5.6mm, providing users with a good adaptive touch and complying with IP50 standards. The KSD-KSC5 switch is mainly used in industrial, consumer electronics, and automotive applications.
0.104644s