产品图纸(PDF):KSD-V Series 下载
KSD-V Series 技术特性标准规范触点额定值:10 GPA@125 V AC 50/60 Hz T85;在250伏交流电50/60赫兹T85下,平均绩点为5;2(0.5)A@250伏交流电压50/60赫兹T85;4RA@30vdc T85电气寿命:满载时10000次通断循环。接触电阻:典型值低于10mΩ。最初的@2-4V DC、100mA。绝缘电阻:最小109Ω。介电强度:海平面最低1000Vrms。工作温度:-30ºC至+85ºC。材料外壳:6/6尼龙(UL94V-2),黑色。顶板:6/6尼龙(UL94V-2),黑色。致动器:玻璃纤维填充聚酯(UL94V-0),'01和02'型,黑色(标准)12、13和14'款式,红色(标准)。触点:铜,镀银。端子:铜,镀银。接触弹簧:音乐线或不锈钢。端子密封:环氧树脂。品牌:科斯达开关 KSDKG/KOSOD SWITCH/KESIDA产品应用:医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域科斯达开关厂的KSD-V 系列电源和线电压选择大功率滑动开关, 被那些寻求耐用、高性能开关的家电设计师所应用。有卡入式面板、PC 安装和起动器, 附带螺丝刀槽, KSD-V 拨动开关大电流系列还具有可选的快速连接端子, 额定电流高达 10 安培。KSD-V Series Technical characteristicsstandard specification Contact rating: 10 GPA@125 V AC 50/60 Hz T85;At 250 volts AC 50/60 hertz T85, the average GPA is 5;2 (0.5) A @ 250V AC voltage 50/60Hz T85;4RA@30vdc T85Electrical lifespan: 10000 on-off cycles at full load.Contact resistance: Typical value below 10m Ω. initial@2-4V DC, 100mA.Insulation resistance: minimum 109 Ω.Dielectric strength: Minimum 1000Vrms at sea level.Working temperature: -30 º C to+85 º C.Material ScienceShell: 6/6 nylon (UL94V-2), black.Top plate: 6/6 nylon (UL94V-2), black.Actuator: glass fiber filled polyester (UL94V-0), types' 01 and 02 ',Black (standard) 12, 13, and 14 'styles, red (standard).Contact: Copper, silver plated.Terminal: Copper, silver plated.Contact spring: music line or stainless steel.Terminal sealing: epoxy resin.Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDAProduct applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fieldsThe KSD-V series power supply and line voltage selection high-power sliding switch from Costa Switch Factory are applied by home appliance designers who seek durable and high-performance switches. There is a snap in panel, PC installation, and starter with screwdriver slot. The KSD-V toggle switch high current series also has optional quick connect terminals with a rated current of up to 10 amperes.