您现在的位置: 首页 > 产品中心 > 开关系列 > 拨动开关 > 大电流拨动开关 >
KSD-1000 Series

KSD-1000 Series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-1000 Series  技术特性
标准规范
触点额定值:B触点材料:最大0.4VA@
最大20 V AC或DC Q触点材料:6 AMPS@
120伏交流电或28伏直流电,250伏交流电时为3安培。
更多评级见I-16页。
电气寿命:满负荷运行100000次通断循环
使用B、K或P接触材料的模型上的负载;40000次循环
在具有G、Q、L、M、S或R接触材料的型号上。
接触电阻:典型值低于10mΩ。初始@
2-4V DC,100mA,适用于镀银和镀金触点。
绝缘电阻:最小109Ω。
介电强度:海平面最低1000Vrms。
工作温度:-30ºC至65ºC
可焊性:根据MIL-STD-202F方法208D,或
EIA RS-186E方法9(1小时蒸汽老化)
材料
案例:邻苯二甲酸二烯丙酯(DAP),(UL 94V-0)。
致动器:尼龙,黑色,标准。
外壳:不锈钢。
开关支架:黄铜或钢,哑光镀锡。
端部触点:B触点材料:铜合金,上面镀金
镍板。Q触点材料:硬币银,镀银。请参阅
其他联系材料见I-16页。
中心触点和所有端子:B触点材料:铜
合金,镀镍层上镀金。Q触点材料:铜
镀银合金。其他联系材料见I-16页。
端子密封:环氧树脂。请参阅技术手册中的焊接和清洁
数据章节
品牌:科斯达开关  KSDKG/KOSOD SWITCH/KESIDA
产品应用:医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域

科斯达开关厂的KSD-1000 Series 系列小型滑动开关通常用于测试和测量设备、电信和计算机及外围设备行业的应用。KSD-1000 系列提供多种触头和端子, 端子密封可兼容底部清洗, 并带有可选的面板安装凸片。


KSD-1000 Series   Technical characteristics
standard specification 
Contact Rating: B Contact Material: Maximum 0.4VA@
Maximum 20 V AC or DC Q Contact Material: 6 AMPS@
120 volts AC or 28 volts DC, with 3 amperes at 250 volts AC.
More ratings can be found on page I-16.
Electrical lifespan: 100000 on-off cycles at full load operation
Load on the model using B, K, or P contact materials; 40000 cycles
On models with G, Q, L, M, S, or R contact materials.
Contact resistance: Typical value below 10m Ω. Initial@
2-4V DC, 100mA, suitable for silver and gold plated contacts.
Insulation resistance: minimum 109 Ω.
Dielectric strength: Minimum 1000Vrms at sea level.
Working temperature: -30 º C to 65 º C
Solderability: According to MIL-STD-202F method 208D, or
EIA RS-186E Method 9 (1-hour steam aging)
Material Science
Case: Diallyl phthalate (DAP), (UL 94V-0).
Actuator: nylon, black, standard.
Shell: Stainless steel.
Switch bracket: brass or steel, matte tin plated.
End contact: B Contact material: Copper alloy, gold plated on top
Nickel plate. Q Contact Material: Coin Silver, Silver Plated. see also
Other contact materials can be found on page I-16.
Center contact and all terminals: B Contact material: copper
Alloy, gold plating on nickel plating layer. Q Contact Material: Copper
Silver plated alloy. Other contact materials can be found on page I-16.
Terminal sealing: epoxy resin. Please refer to the technical manual for welding and cleaning
Data Chapter
Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDA
Product applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fields

The KSD-1000 Series small sliding switches from Costa Switch Factory are commonly used in applications in the testing and measuring equipment, telecommunications, computer, and peripheral equipment industries. The KSD-1000 series offers a variety of contacts and terminals, with terminal seals compatible with bottom cleaning and optional panel mounting tabs.
0.097647s