KSD-K5AT series

产品特性应用范围

样品申请

浏览 65 次

产品特性

应用范围

KSD-K5AT series 技术特性
电气
最小/最大功率：0.02VA/1.0VA
最小/最大电压：20mVdc–32 Vdc
最小/最大电流：0.1mA–100mA
接触电阻：<100mΩ
绝缘电阻：>1GΩ初始值，>10MΩ湿热后
反弹时间：<10ms
环境保护
工作温度：-40˚C至125˚C
储存温度：-55˚C至125˚C
相对湿度：根据NF EN 60068-2-30，为90%至96%
防护：防尘和防熔剂（IP 40）
过载：最小40N
工艺流程
焊接：与无铅焊接型材兼容。
禁止清洗
MSL级别：5
材料
触点：Au over Ni
端子：Au over Ni
外壳：热塑性UL94 V0
规格说明
功能：瞬时动作
触点布置：常开
端子：带定位销钉的SMT；
无定位销钉的SMT可用，
机械的
类型驱动力（N）4.0
使用寿命300000
行程（总行程）0.45（0.95）mm（mm）
驱动力公差为±25%。
密封等级：IP40
照明颜色
白色、蓝色、纯绿色、橙色、超红色
产品规格上提供的LED技术信息。如需其他颜色，请联系您的销售代表。
包装在密封箔下的900个卷盘中。卷筒尺寸符合EIA RS481或IEC 2863。外径380 mm。
工艺流程焊接：与无铅焊接型材兼容。
禁止清洗
MSL等级：5a
材料
触点：Ag over Ni
端子：Ag/Ni
外壳：热塑性UL94 V0
注：
数据表中显示的规格仅供参考，对以下情况无效
工作中的设计。请联系您的销售代表索取图纸和
产品规格。
对于需要可靠性和安全性的系统，请联系您的销售人员
代表确保产品集成和功能安全使用。

科斯达开关厂开发的KSD-K5AT series 带灯贴片SMT 轻触开关提供高亮度的 LED 灯, 并通过「2合1」板减少了使用空间。它采用出色的人体工程学设计, 锐利的触感和听觉咔哒声, 非常适合需要在最恶劣的环境中工作的网络基础设施、电信和医疗产品。

Technical characteristics of ksd-k5at series
electrical
Minimum/maximum power: 0.02va/1.0va
Minimum/maximum voltage: 20mvdc – 32 VDC
Minimum/maximum current: 0.1mA – 100mA
Contact resistance:<100m Ω
Insulation resistance:>1g Ω initial value,>10m Ω after damp heat
Rebound time:<10ms
environmental protection
Operating temperature: -40 ˚ C to 125 ˚ C
Storage temperature: -55 ˚ C to 125 ˚ C
Relative humidity: 90% to 96% according to NF en 60068-2-30
Protection: dust and flux (IP 40)
Overload: minimum 40n
process flow
Welding: compatible with lead-free welded profiles.
No cleaning
MSL level: 5
material
Contact: Au over Ni
Terminal: Au over Ni
Housing: thermoplastic UL94 v0
description
Function: instantaneous action
Contact arrangement: normally open
Terminal: SMT with locating pin;
SMT without dowel is available,
Mechanical
Type driving force (n) 4.0
Service life 300000
Stroke (total stroke) 0.45 (0.95) mm (mm)
The driving force tolerance is ± 25%.
Sealing grade: IP40
Lighting color
White, blue, pure green, orange, super red
Led technical information provided on product specifications. For other colors, please contact your sales representative.
900 reels packed under sealing foil. The drum size complies with EIA rs481 or IEC 2863. Outer diameter 380 mm.
Process welding: compatible with lead-free welding profiles.
No cleaning
MSL grade: 5A
material
Contact: Ag over Ni
Terminal: ag/ni
Housing: thermoplastic UL94 v0
Note:
The specifications shown in the data sheet are for reference only and are not valid in the following cases
Design at work. Please contact your sales representative for drawings and
Product specifications.
For systems that require reliability and security, please contact your salesperson
Representatives ensure product integration and safe use of functions.
Ksd-k5at series SMT light touch switch with light patch developed by Costa switch factory provides high brightness LED lights, and reduces the use space through the "2 in 1" board. With excellent ergonomic design, sharp touch and audible click, it is very suitable for network infrastructure, telecommunications and medical products that need to work in the worst environment.

Current Rating:100mA @ 32VDC
Circuit:SPST-NO
Mounting Type:Surface Mount
Sealing:Sealed - IP40
Illumination:Yes
Switch Function:Off-Mom
Electrical Life Cycles:100,000
Actuator Type:Round Button
Actuator Height off PCB, from Pins:6.10mm
Actuator Orientation:Top Actuated
Termination Style:Gull Wing
Footprint:8.40mm x 8.00mm
Illumination Voltage (Nominal):
Illumination Type, Color:LED, Blue
Operating Force:400gf
Additional Features:Tactile Feedback
Packaging:Tape & Reel

上一个：KSD-K8 series
下一个：KSD-K5V series