您现在的位置: 首页 > 产品中心 > 开关系列 > 轻触开关 > 防水轻触开关 >
KSD-KSC10  series

KSD-KSC10 series

  • 产品特性
  • 应用范围

图纸下载 样品申请

KSD-KSC10  series       技术特性
SMT 密封轻触开关防水IP67
电气
最大功率:1瓦0.2瓦
最大电压:32伏直流32伏直流
最小电压:20 mV 20 mV
最大电流:50 mA 10 mA
最小电流:1mA*0.1mA
介电强度(50 Hz,1分钟):≥250 Vrms
接触电阻:≤100mΩ
绝缘电阻(100v):≥10MΩ
弹跳时间:≤1ms
*根据要求,可提供10µA-1 VDC版本的超低电流
KSD-KSC2和KSD-KSC4
包装磁带和卷轴(数量信息见系列)
注:以上列出的规格适用于具有标准选项的开关。
规范
功能:瞬时动作
接触布置:1接触=SPST,N.O。
端子:J型弯曲和鸥翼式,适用于SMT
密封:IP67,KSC5除外(IP50)
责任限制此数据表没有提供足够的信息需要一定质量或安全水平的应用程序例如汽车、医疗系统或安全设备。请联系客户服务部了解合同内容

规格包。
环保银金
工作温度:-40℃至85℃-40℃至125℃
储存温度:-55˚C至85˚C-55˚C至125˚C
流程
焊接:根据应用的不同,该组件是
适用于以下方法:
-端子在镍屏障上镀银或镀金使用微活化焊剂是合适的。–立式双波焊机上的焊接:焊接时间≤5秒。–按照典型的洗涤流程进行清洁。-红外回流焊符合IEC 61760-1标准。

科斯达开关厂的KSD-KSC10  series  的 KSD-KSC10 系列密封 SMT 贴片防水轻触开关为用户提供良好的适应性触感 ─ 它的小尺寸非常适合专为工业、消费类、汽车和仪表应用的产品。KSD-KSC10 轻触开关是一款 IP67 等级的 4.9mm 高的硅胶触头开关。

KSD-KSC10  series        Technical characteristics
SMT sealed touch switch waterproof IP67
electrical
Maximum power: 1 watt 0.2 watts
Maximum voltage: 32 volts DC 32 volts DC
Minimum voltage: 20 mV, 20 mV
Maximum current: 50 mA, 10 mA
Minimum current: 1mA * 0.1mA
Dielectric strength (50 Hz, 1 minute): ≥ 250 Vrms
Contact resistance: ≤ 100m Ω
Insulation resistance (100v): ≥ 10M Ω
Bounce time: ≤ 1ms
*According to the requirements, ultra-low current versions of 10 µ A-1 VDC can be provided
KSD-KSC2 and KSD-KSC4
Packaging tapes and reels (quantity information can be found in the series)
Note: The specifications listed above apply to switches with standard options.
standard
Function: Instantaneous action
Contact arrangement: 1 contact=SPST, N.O.
Terminal: J-bend and gull wing type, suitable for SMT
Sealing: IP67, except KSC5 (IP50)
Liability limitation: This data sheet does not provide sufficient information for applications that require a certain level of quality or safety, such as automobiles, medical systems, or safety equipment. Please contact the customer service department to inquire about the contents of the contract
Specification package.
Environmental Protection Silver Gold
Working temperature: -40 ℃ to 85 ℃ -40 ℃ to 125 ℃
Storage temperature: -55 ° C to 85 ° C -55 ° C to 125 ° C
technological process
Welding: Depending on the application, this component is
Applicable to the following methods:
-It is appropriate to use micro activated solder to silver or gold plate the terminals on the nickel barrier Welding on vertical double wave welding machine: welding time ≤ 5 seconds Clean according to the typical washing process- Infrared reflow soldering complies with IEC 61760-1 standard.
The KSD-KSC10 series of KSD-KSC10 sealed SMT patch waterproof touch switches from Kosda Switch Factory provides users with a good adaptive tactile sensation - its small size is very suitable for products specifically designed for industrial, consumer, automotive, and instrument applications. The KSD-KSC10 tactile switch is a 4.9mm high silicone contact switch with IP67 rating.
0.103641s