您现在的位置: 首页 > 产品中心 > 开关系列 > 轻触开关 > 防水轻触开关 >
KSD-KSC3  series

KSD-KSC3 series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-KSC3  series 技术特性
SMD贴片硅胶轻触开关防水IP67
电气
最大功率:1瓦0.2瓦
最大电压:32伏直流32伏直流
最小电压:20 mV 20 mV
最大电流:50 mA 10 mA
最小电流:1mA*0.1mA
介电强度(50 Hz,1分钟):≥250 Vrms
接触电阻:≤100mΩ
绝缘电阻(100v):≥10MΩ
弹跳时间:≤1ms
*根据要求,可提供10µA-1 VDC版本的超低电流
KSC2和KSC4
包装
磁带和卷轴(数量信息见系列)
注:以上列出的规格适用于具有标准选项的开关。
规范
功能:瞬时动作
接触布置:1接触=SPST,N.O。
端子:J型弯曲和鸥翼式,适用于SMT
密封:IP67,KSC5除外(IP50)

此数据表没有提供足够的信息
需要一定质量或安全水平的应用程序
例如汽车、医疗系统或安全设备。
请联系客户服务部了解合同内容
规格包。
环保银金
工作温度:-40℃至85℃-40℃至125℃
储存温度:-55˚C至85˚C-55˚C至125˚C
流程
焊接:根据应用的不同,该组件是
适用于以下方法:
-端子在镍屏障上镀银或镀金
使用微活化焊剂是合适的。
–立式双波焊机上的焊接:焊接时间≤5秒。
–按照典型的洗涤流程进行清洁。-符合IEC的无铅回流焊接工艺61760-1.
科斯达开关厂的KSD-KSC3  series  SMT 密封轻触开关专为小型应用和产品而设计。其良好的适应性触感非常适合工业、汽车和消费类电子应用, 如手机和车门把手。KSD-KSC3防水开关是符合 IP67 标准的, 3.5mm 高的塑胶触头轻触开关。


Technical features of KSD-KSC3 series
SMD patch silicone touch switch waterproof IP67
electrical
Maximum power: 1 watt 0.2 watts
Maximum voltage: 32 volts DC 32 volts DC
Minimum voltage: 20 mV, 20 mV
Maximum current: 50 mA, 10 mA
Minimum current: 1mA * 0.1mA
Dielectric strength (50 Hz, 1 minute): ≥ 250 Vrms
Contact resistance: ≤ 100m Ω
Insulation resistance (100v): ≥ 10M Ω
Bounce time: ≤ 1ms
*According to the requirements, ultra-low current versions of 10 µ A-1 VDC can be provided
KSC2 and KSC4
packing
Magnetic tapes and reels (see series for quantity information)
Note: The specifications listed above apply to switches with standard options.
standard
Function: Instantaneous action
Contact arrangement: 1 contact=SPST, N.O.
Terminal: J-bend and gull wing type, suitable for SMT
Sealing: IP67, except KSC5 (IP50)
This data table does not provide sufficient information
Applications that require a certain level of quality or safety
For example, cars, medical systems, or safety equipment.
Please contact the customer service department to inquire about the contents of the contract
Specification package.
Environmental Protection Silver Gold
Working temperature: -40 ℃ to 85 ℃ -40 ℃ to 125 ℃
Storage temperature: -55 ° C to 85 ° C -55 ° C to 125 ° C
technological process
Welding: Depending on the application, this component is
Applicable to the following methods:
-The terminals are silver or gold plated on the nickel barrier
It is appropriate to use micro activated solder flux.
Welding on vertical double wave welding machine: welding time ≤ 5 seconds.
Clean according to the typical washing process- IEC compliant lead-free reflow soldering process 61760-1
The KSD-KSC3 series SMT sealed tactile switch from Costa Switch Factory is designed specifically for small applications and products. Its excellent adaptive touch is very suitable for industrial, automotive, and consumer electronics applications, such as mobile phones and door handles. The KSD-KSC3 waterproof switch is an IP67 compliant, 3.5mm high plastic contact touch switch



Current Rating:50mA @ 32VDC
Circuit:SPST-NO
Mounting Type:Surface Mount
Sealing:Sealed - IP67
Illumination:No/None
Switch Function:Off-Mom
Electrical Life Cycles:300,000
Actuator Type:Standard
Actuator Height off PCB, from Pins:3.50mm
Actuator Orientation:Top Actuated
Termination Style:Gull Wing
Footprint:6.20mm x 6.20mm
Illumination Voltage (Nominal):
Illumination Type, Color:
Operating Force:200gf
Additional Features:
Packaging:Tape & Reel
0.098740s