您现在的位置: 首页 > 产品中心 > 开关系列 > 挂钩开关 >
KSD-HSW-22-1G  Series

KSD-HSW-22-1G Series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-HSW-22-1G  Series 技术特性
叉簧开关标准规范
额定值(最大)0.2A 48V DC
(电阻负载)
接触电阻最大50毫欧。
绝缘电阻至少为100兆欧,直流电压为500V
耐受500V AC电压1分钟。
无负载运行寿命200000次循环
负载运行寿命200000次循环

备注
笔记
1.产品的外观和规格可能会被修改以提高其性能,恕不另行通知。
2.本目录仅显示外形规格。使用产品时,请获得正式规格。
3.请参阅附录[开关使用注意事项]。
4.这个开关不可洗。
5.焊接时,应将杠杆置于自由位置,注意不要将焊剂附着在塑料部分。
6.请注意,如果在焊接过程中对端子施加应力,它们可能会导致端子变形和缺陷电气性能。
7.请在PC板或其他安装物体上制作杠杆止动器。应注意不要使用如果开关没有止动器,可能会导致杠杆变形和性能下降。
8.请考虑杠杆的操作距离是否足够符合规格。
9.应注意不要对开关主体施加应力,因为这可能会影响性能。
10.请通过模拟实际操作环境来确认高性能可靠性。


KSD-HSW-22-1G Series Technical Features
Standard specification for fork spring switch
Rated value (maximum) 0.2A 48V DC
(Resistive load)
The maximum contact resistance is 50 milliohms.
The insulation resistance should be at least 100 megaohms, and the DC voltage should be 500V
Withstand 500V AC voltage for 1 minute.
Operating life without load 200000 cycles
Load operating life 200000 cycles

remarks
note
1. The appearance and specifications of the product may be modified to improve its performance without prior notice.
2. This catalog only displays the external specifications. Please obtain formal specifications when using the product.
3. Please refer to the appendix [Precautions for Switch Use].
This switch is not washable.
When welding, the lever should be placed in a free position and care should be taken not to attach the solder to the plastic part.
6. Please note that if stress is applied to the terminals during the welding process, it may cause deformation and defects in the electrical performance of the terminals.
7. Please make lever stoppers on the PC board or other installation objects. Attention should be paid not to use switches without stoppers, as it may cause lever deformation and performance degradation.
8. Please consider whether the operating distance of the lever is sufficient to meet the specifications.
9. Attention should be paid not to apply stress to the switch body, as this may affect performance.
10. Please confirm high-performance reliability by simulating the actual operating environment.

0.095935s