您现在的位置: 首页 > 产品中心 > 开关系列 > 按钮开关 > 金属按钮开关 >
KSD-MPB22 Series

KSD-MPB22 Series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-MPB22 Series  技术特性 
标准规范
额定值:5A/250VAC电阻性负载3A250VAC
接触电阻:1A 12VDC(初始值)时最大50 mΩ
绝缘电阻:500VDC时最小1000 MΩ
模具电强度:2000V RMS@海平面
工作温度:-20°C至55°C
机械寿命:瞬时1000000次循环
自锁500000次循环
电气寿命:满载时50000次通断循环
扭矩:5~14Nm
工作压力:1极2。5+1N/2极3.5+1N
旅行:大约3。2mm
入口防护:IP67,IK10(不锈钢)

材料。
衬套:不锈钢1铝合金
基础:PBT(UL 94-V0),PC(UL 94-V2)
执行器:PC;不锈钢1铝合金
内部组件:POM I PA66。
弹簧:弹簧钢。
密封:硅胶。
0型环:硅胶。
端子:黄铜,镀银或镀金。
触点:黄铜、硬币银、镀银或镀金
六角螺母:镀镍黄铜



品牌:科斯达开关  KSDKG/KOSOD SWITCH/KESIDA
产品应用:医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域

带灯直径22MM金属开关
KSD-MPB22 Series防水带灯按键开关金属式
科斯达开关厂在增大尺寸的金属开关设计上,不同于市场上一般的简化方式,反而增加了抗破坏最重要的材质-金属不锈钢-外壳,防止常见的产品变大、强度下降的问题,维持了IK10与IP67的等级,使用上,也维持方便性,只需要懂我们一种尺寸的开关就好。
22mm金属开关在电气规格方面可耐到5A,作动在3A/250VAC。 若要更高电流规格,科斯达开关厂还有另一个大电流开关-MW系列可以供使用者选用。

KSD-MPB22 Series   Technical characteristics
standard specification 
Rated value: 5A/250VAC resistive load 3A250VAC
Contact resistance: maximum 50 m Ω at 1A 12VDC (initial value)
Insulation resistance: minimum 1000 M Ω at 500VDC
Mold electrical strength: 2000V RMS @ sea level
Working temperature: -20 ° C to 55 ° C
Mechanical lifespan: Instantaneous 1000000 cycles
Self locking 500000 cycles
Electrical lifespan: 50000 on-off cycles at full load
Torque: 5-14Nm
Work pressure: 1 extreme 2. 5+1N/2-pole 3.5+1N
Travel: Approximately 3. 2mm
Entrance protection: IP67, IK10 (stainless steel)

Material Science.
Lining: Stainless Steel 1 Aluminum Alloy
Fundamentals: PBT (UL 94-V0), PC (UL 94-V2)
Executor: PC; Stainless Steel 1 Aluminum Alloy
Internal components: POM I PA66.
Spring: Spring steel.
Sealing: Silicone.
O-ring: Silicone.
Terminal: brass, silver or gold plated.
Contact: brass, coin silver, silver plated or gold-plated
Hexagonal nut: Nickel plated brass



Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDA
Product applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fields

22MM metal switch with lamp diameter
KSD-MPB22 Series Waterproof Light Button Switch Metal Type
In the design of metal switches with increased size, Kosda Switch Factory differs from the typical simplified approach in the market. Instead, they have added the most important material for resistance to damage - metal stainless steel - to the casing, preventing common problems such as product enlargement and strength reduction. They maintain the IK10 and IP67 ratings, and also maintain convenience in use. Just understand one size of switch from us.
The 22mm metal switch can withstand up to 5A in electrical specifications and operate at 3A/250VAC. For higher current specifications, Costa Switch Factory has another high current switch - the MW series - available for users to choose from
0.101602s