KSD-PTS125 SMT series

产品特性应用范围

样品申请

浏览 47 次

产品特性

应用范围

KSD-PTS125 SMT series技术特性
轻触开关12 MM 标准规范
功能：瞬时动作
联系方式：1联系SPST，不需要。
端子：THT的PC引脚和SMT的G型引脚
行程：130 gf 0.20 mm
180克力0.25毫米
250克力0.30毫米
350克力0.35毫米
机械
操作力：130 gf、180 gf、250 gf、350 gf
电气
最大电压：12伏直流电
最大电流：50mA
介电强度：250伏交流电（1分钟）
接触电阻：<100 mΩ
绝缘电阻：>100MΩ
弹跳时间：<5ms
注：
•上述规格适用于带标准选项的开关。供参考
关于特定和定制的开关，请咨询客户服务中心。
•PTS系列未经汽车应用认证，也没有PPAP。
然而，在某些汽车配件和特定应用的情况下
PTS广泛应用于2轮和3轮车辆，非常适合。请联系
科斯达开关厂代表将讨论您的应用程序和最佳交换机
解决方案。
环境的
工作温度：-40˚C至85˚C
流程
焊接：该组件适用于以下方法：
符合IEC 61760-1的红外回流焊接
SMT版本
波峰焊与无铅焊接型材兼容
包装
卷筒尺寸符合EIA 481B。外径330毫米

品牌：科斯达开关 KSDKG/KOSOD SWITCH/KESIDA
产品应用：医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域

科斯达开关厂KSD-PTS125 SMT series 的系列 12mm*12mm 轻触开关最常见于工业、消费类电子产品、仪器仪表和计算设备。KSD-PTS125 直立轻触开关可长时间使用并且有高响应度, 提供各种高度, 配有卡扣式触头选项, THT 和 SMT 端接。

Technical characteristics of KSD-PTS125 SMT series
Standard specification for touch switch 12 MM
Function: Instantaneous action
Contact information: 1. Contact SPST, no need.
Terminal: THT's PC pin and SMT's G-type pin
Travel: 130 gf 0.20 mm
180 grams force 0.25 millimeters
250 grams force 0.30 millimeters
350 grams force 0.35 millimeters
Mechanics
Operating force: 130 gf, 180 gf, 250 gf, 350 gf
electrical
Maximum voltage: 12V DC
Maximum current: 50mA
Dielectric strength: 250V AC (1 minute)
Contact resistance:<100 m Ω
Insulation resistance:>100M Ω
Bounce time:<5ms
Note:
The above specifications are applicable to switches with standard options. For reference only
For specific and customized switches, please consult the customer service center.
The PTS series has not been certified for automotive applications and does not have PPAP.
However, in certain automotive parts and specific applications
PTS is widely used in 2-wheel and 3-wheel vehicles and is very suitable. Please contact
Representatives from Costa Switch Factory will discuss your application and the best switch
Solution.
The environment
Working temperature: -40 ° C to 85 ° C
technological process
Welding: This component is suitable for the following methods:
Infrared reflow soldering in accordance with IEC 61760-1
SMT version
Compatible with wave soldering and lead-free soldering profiles
packing
The drum size complies with EIA 481B. Outer diameter 330 millimeters
Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDA
Product applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fields
The KSD-PTS125 SMT series of Costa Switch Factory's 12mm * 12mm tactile switches are most commonly used in industrial, consumer electronics, instrumentation, and computing devices. The KSD-PTS125 upright tactile switch can be used for a long time and has high responsiveness. It is available in various heights and comes with snap on contact options, THT and SMT termination.

Current Rating:50mA @ 12VDC
Circuit:SPST-NO
Mounting Type:Thru-hole
Sealing:Sealed - IP40
Illumination:No/None
Switch Function:Off-Mo
Electrical Life Cycles:1,000,000
Actuator Type:Square snap fit
Actuator Height off PCB, from Pins:7.30mm
Actuator Orientation:Top Actuated
Termination Style:Thru-hole
Footprint:12.00mm x 12.00mm
Illumination Voltage (Nominal):
Illumination Type, Color:
Operating Force:250gf
Additional Features:
Packaging:Bulk

上一个：KSD-KS series
下一个：KSD-PTS125 series