您现在的位置: 首页 > 产品中心 > 开关系列 > 轻触开关 >
KSD-KS series

KSD-KS series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-KS series技术特性
KS系列单极轻触开关 标准规范
触点额定值:Q触点材料:25mA@
最大50V交流或直流。
电气寿命:100000次启动。
接触电阻:初始值低于100 mΩ@
2-4V直流,100mA
绝缘电阻:最小109Ω。
介电强度:海平面最低1000Vrms。
工作温度:-30˚C至65˚C。
可焊性:根据MIL-STD-202F方法208D,或
EIA RS-186E方法9(1小时蒸汽老化)。
材料
外壳:玻璃纤维填充尼龙(UL 94V-0)。
执行器:ABS,哑光表面,黑色标准。
活动触点:Q触点材料:不锈钢,镀银。
固定触点和端子:Q触点材料:
镀银铜合金。
端子密封:环氧树脂
注:以上列出的规格和材料适用于具有标准选项的开关。
有关特定和自定义开关的信息,请咨询客户服务中心。

品牌:科斯达开关  KSDKG/KOSOD SWITCH/KESIDA
产品应用:医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域

科斯达开关厂KSD-KS series单极复位按键开关有各种帽盖颜色以及 SPST 或 SPDT 配置, 适用于仪器仪表和电信行业的产品。KSD-KS 轻触按键开关是为满足所有高性能要求而设计的, 开关同时为终端用户提供长时间一致性的触感。


KSD-KS series technical features
Standard specification for KS series single pole tactile switch
Contact rating: Q Contact material: 25mA@
Maximum 50V AC or DC.
Electrical lifespan: 100000 starts.
Contact resistance: Initial value below 100 m Ω@
2-4V DC, 100mA
Insulation resistance: minimum 109 Ω.
Dielectric strength: Minimum 1000Vrms at sea level.
Working temperature: -30 ° C to 65 ° C.
Solderability: According to MIL-STD-202F method 208D, or
EIA RS-186E Method 9 (1-hour steam aging).
Material Science
Shell: Fiberglass filled nylon (UL 94V-0).
Actuator: ABS, matte surface, black standard.
Active contact: Q Contact material: stainless steel, silver plated.
Fixed contacts and terminals: Q Contact material:
Silver plated copper alloy.
Terminal sealing: epoxy resin
Note: The specifications and materials listed above are applicable to switches with standard options.
For information on specific and custom switches, please consult the customer service center.
Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDA
Product applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fields
The KSD-KS series single pole reset button switch from Costa Switch Factory comes in various cap colors and SPST or SPDT configurations, suitable for products in the instrumentation and telecommunications industries. The KSD-KS touch button switch is designed to meet all high-performance requirements, while providing long-term consistent tactile feedback for end users.


Current Rating:0.4VA (AC/DC)
Circuit:SPST-NO
Mounting Type:Thru-hole
Sealing:Unsealed
Illumination:No/None
Switch Function:Off-Mom On
Electrical Life Cycles:100,000
Voltage Rating - AC:20V
Voltage Rating - DC:20V
Actuator Type:Square, Button
Color - Actuator/Cap:White
Illumination Type, Color:
Termination Style:Thru-hole
Packaging:Bulk
0.098838s