您现在的位置: 首页 > 产品中心 > 开关系列 > 按钮开关 > 金属按钮开关 >
KSD-MPB25 Series

KSD-MPB25 Series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-MPB25 Series  技术特性 
标准规范
额定值:5A/250VAC电阻性负载3A/250VAC
接触电阻:1A 12VDC(初始值)时最大50 mΩ
绝缘电阻:500VDC时最小1000 MΩ
介电强度:2000V RMS@海平面
工作温度:-20°C至55°C
机械寿命:瞬时1000000次循环
自锁500000次循环
电气寿命:满载时50000次通断循环
扭矩:5~14Nm
工作压力:1极2.5+1N 1 2极3.5+1N
行程:约3.2mm
入口防护:IP67,IK08(不锈钢)

材料。
衬套:不锈钢1铝合金
基础:PBT(UL 94-V0),PC(UL 94-V2)
执行器:PC;不锈钢1铝合金
内部组件:pom1pa66。
弹簧:弹簧钢。
密封:硅胶。
O型圈:硅胶。
端子:黄铜、镀银或镀金。
触点:黄铜、硬币银、镀银或镀金。
六角螺母:镀镍黄铜


品牌:科斯达开关  KSDKG/KOSOD SWITCH/KESIDA
产品应用:医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域

按钮25MM带灯金属开关
KSD-MPB25 Series带灯金属按键开关
当您看到科斯达金属开关25mm金属开关时,您会发现,科斯达开关厂真的是不计成本的在提供优良开关产品给客人,厚厚的金属用料,是我们对"抗破坏"的坚持,就是要撞不坏,直到使用期限为止,都不会被刻意破坏而不能使用。 同系列拥有的IK10与IP67不能少,双pole规格更能使用配线方式,使用双色切换功能。
25mm金属开关在电气规格方面可耐5A,作动在3A/250VAC,若要更高电流规格,科斯达开关厂还有另一个大电流开关-MW系列可以供使用者选用。

KSD-MPB25 Series   Technical characteristics
standard specification 
Rated value: 5A/250VAC resistive load 3A/250VAC
Contact resistance: maximum 50 m Ω at 1A 12VDC (initial value)
Insulation resistance: minimum 1000 M Ω at 500VDC
Dielectric strength: 2000V RMS @ sea level
Working temperature: -20 ° C to 55 ° C
Mechanical lifespan: Instantaneous 1000000 cycles
Self locking 500000 cycles
Electrical lifespan: 50000 on-off cycles at full load
Torque: 5-14Nm
Work pressure: 1 pole 2.5+1N 1 2 poles 3.5+1N
Journey: Approximately 3.2mm
Entrance protection: IP67, IK08 (stainless steel)

Material Science.
Lining: Stainless Steel 1 Aluminum Alloy
Fundamentals: PBT (UL 94-V0), PC (UL 94-V2)
Executor: PC; Stainless Steel 1 Aluminum Alloy
Internal component: pom1pa66.
Spring: Spring steel.
Sealing: Silicone.
O-ring: Silicone.
Terminal: brass, silver plated or gold plated.
Contact points: brass, coin silver, silver plated or gold-plated.
Hexagonal nut: Nickel plated brass


Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDA
Product applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fields

Button 25MM with illuminated metal switch
KSD-MPB25 Series Metal Button Switch with Light
When you see the Costa metal switch 25mm metal switch, you will find that Costa switch factory is really providing excellent switch products to customers at no cost. Thick metal materials are our insistence on "anti damage", which means that they will not be deliberately damaged and cannot be used until the end of their service life. IK10 and IP67 are essential in the same series, and the dual pole specification allows for better use of wiring and dual color switching function.
The 25mm metal switch can withstand 5A in electrical specifications and operate at 3A/250VAC. If higher current specifications are required, Costa Switch Factory also has another high current switch - the MW series - for users to choose from.
0.106314s