您现在的位置: 首页 > 产品中心 > 开关系列 > 按钮开关 > 金属按钮开关 >
KSD-MPB19 Series

KSD-MPB19 Series

  • 产品特性
  • 应用范围

图纸下载 样品申请
KSD-MPB19 Series  技术特性 
标准规范
额定值:5A/250VAC电阻性负载3A/250VAC
接触电阻:1A 12VDC(初始值)时最大50 mΩ
绝缘电阻:500VDC时最小1000 MΩ
介电强度:2000V RMS@海平面
工作温度:-20°C至55°C
机械寿命:1000000次循环
自锁500000次循环
电气寿命:满载时50000次通断循环
扭矩:5~14Nm
工作压力:1极2.5+1N/2极3.5+1N
行程:约3.2mm
入口防护:IP67,IK10(不锈钢)

材料。
衬套:不锈钢/黄铜1铝合金
基础:PBT(UL 94-V0),PC(UL 94-V2)
执行器:PC(UL 94-V2);不锈钢
黄铜/铝合金
内部组件:pom1pa66。
弹簧:弹簧钢。
密封:硅胶。
0型环:硅胶。
端子:黄铜、镀金或镀银
触点:黄铜、硬币银、镀金或镀银
六角螺母:镀镍黄铜。

品牌:科斯达开关  KSDKG/KOSOD SWITCH/KESIDA
产品应用:医疗电器、航模、无人机、灯具照明、通讯、控制手柄、速控设备、新能源、航模设备、仪表仪器、小家电、汽车等领域

金属带灯开关KSD-MPB19 Series
按键金属开关19mm开孔尺寸,采用金属不锈钢等级用料,完全可以说是抗破坏的开关,防护等级更高达IK10,我们有信心即使机构面板损害了金属开关也不会被冲击破坏的现象产生;开关正面防水等级达IP67,明确的保护金属开关周围不会渗水进入机构里面。
科斯达开关厂按键金属开关是目前市场上少数拥有UL认证的金属开关。 在电气规格方面可耐5A,作动在3A/250VAC,已可以满足绝大部份的使用者,若要更高电流规格,科斯达开关厂还有另一个大电流开关-MW系列可以供使用者选用。

KSD-MPB19 Series   Technical characteristics
standard specification 
Rated value: 5A/250VAC resistive load 3A/250VAC
Contact resistance: maximum 50 m Ω at 1A 12VDC (initial value)
Insulation resistance: minimum 1000 M Ω at 500VDC
Dielectric strength: 2000V RMS @ sea level
Working temperature: -20 ° C to 55 ° C
Mechanical lifespan: 1000000 cycles
Self locking 500000 cycles
Electrical lifespan: 50000 on-off cycles at full load
Torque: 5-14Nm
Work pressure: 1 pole 2.5+1N/2 poles 3.5+1N
Journey: Approximately 3.2mm
Entrance protection: IP67, IK10 (stainless steel)

Material Science.
Lining: Stainless Steel/Brass 1 Aluminum Alloy
Fundamentals: PBT (UL 94-V0), PC (UL 94-V2)
Actuator: PC (UL 94-V2); stainless steel
Brass/Aluminum Alloy
Internal component: pom1pa66.
Spring: Spring steel.
Sealing: Silicone.
O-ring: Silicone.
Terminal: brass, gold-plated or silver plated
Contact: brass, coin silver, gold-plated or silver plated
Hexagonal nut: Nickel plated brass.

Brand: Coaster Switch KSDKG/KOSOD SWITCH/KESIDA
Product applications: medical appliances, model aircraft, drones, lighting fixtures, communication, control handles, speed control equipment, new energy, model aircraft equipment, instrumentation, small appliances, automobiles and other fields

Metal strip light switch KSD-MPB19 Series
The 19mm hole size of the button metal switch is made of metal stainless steel grade material, which can be said to be a non-destructive switch with a protection level of up to IK10. We are confident that even if the mechanism panel is damaged, the metal switch will not be damaged by impact; The front of the switch has a waterproof rating of IP67, which clearly protects the metal switch from water leakage into the mechanism.
The key metal switch of Costa Switch Factory is currently one of the few metal switches on the market that has UL certification. In terms of electrical specifications, it can withstand 5A and operate at 3A/250VAC, which can meet the needs of the vast majority of users. If higher current specifications are required, Costa Switch Factory also has another high current switch - the MW series - for users to choose from.
0.094526s